SALIENT FEATURES
3 Artical Tray Stainless Steel.
Carriage.
Thermal Printer.

TECHNICAL SPECIFICATION
VOLTAGE SUPPLY : 220\230 Volt AC
SAFETY DEVICE : Safety Valve & Pressure Control Switch
PRESSURE TRANSMITTER RANGE : VM1 bar to 6barW
HEATING LOAD : 2000 Watts
TEMPERATURE RANGE : 120È M 134Èc
TEMPERATURE SENSOR : P.T. 100
CHAMBER SIZE : 250 X 460 MM
CASE DIMENSION : 500 X 625 X 950

DESCRIPTION
Fully automated Microprocessor based controller
Chambers are made up of thick stainless steel tested with Pressure Vsuperior GradeW.
Highly accurate free scale semiconductor pressure sensor for 2.2 kg V121M135È deg centigrade
Silicon rubber gasket in the door, silicon tubes used in outlet water.
Screw handle for door locking prevents sudden opening of door.
Highly accurate temperature sensor used P.T.O 100.
Auto Cut Off Function.
Used heater coil is of 2000 watts.
Table top front load autoclave.
Blue and White bright seven segment LED display is used to show
Temperature, Pressure, Error & Time.
Parameters saved can be used for next cycle.
Once program is set , if the power supply is stopped suddenly, the
Cycle can be started without any resetting.
Tone buzzer to produce same tones during all operations.
If there is any fault in the pressure and temperature sensor, the
Error will be displayed.
Message display on screen once the process is completed and then
the Next Process starts.
The outlet water tank is Inbuilt within the autoclave itself.
If the PCB gets failed, the door canAt be opened due to pressure
inside, Therefore open the manually operated pressure valve and
release the Pressure, then open the door.
The body can be cleaned by wet cloth. It is free from rust.
When the water is not filled in the cylinder it automatically shows
H2O error.